If you are intending to purchase several items at once, please contact us at
info@ruscool.co.nz - we will calculate some better shipping costs for you

Our fully populated panels are supplied with all of the components fitted onto a
backing plate that is mounted directly to the main panel. The backlighting comes
in either warm-white or cool-white, and can be designed for either 5V or 12V power
supplies. We will organise these details with you at the time of purchase.
KingAir B200 Products

B200 Captain’s Left Panel

Dimensions: 288mm (wide) x 160mm (high)

If purchased with all of the parts, this panel will be supplied along with all of the switches, vinyl caps,
and the hinged ‘Master Switch’ panel too.

B200 Capt. Left Panel - Non-Backlit Panel Only US$89-00


B200 Capt. Left Panel - Non-Backlit Panel w/parts US$208-00


B200 Capt. Left Panel - Backlit Panel Only US$215-00


B200 Capt. Left Panel - Backlit Panel w/parts US$334-00

B200 Captain’s Right Panel

Dimensions: 286mm (wide) x 160mm (high)

If purchased with all of the parts, this panel will be supplied along with all of the switches, vinyl caps,
the landing gear lever (as seen here), and the gear button too.

B200 Capt. Right Panel - Non-Backlit Panel Only US$98-00


B200 Capt. Right Panel - Non-Backlit Panel w/parts US$445-00


B200 Capt. Right Panel - Backlit Panel Only US$232-00


B200 Capt. Right Panel - Backlit Panel w/parts US$579-00

B200 F/O Left Panel

Dimensions: 285mm (wide) x 160mm (high)

If purchased with all of the parts, this panel will be supplied along with all of the switches, the vinyl
caps, rotary switches, and the dummy gauge.

B200 F/O Left Panel - Non-Backlit Panel Only US$95-00


B200 F/OLeft Panel - Non-Backlit Panel w/parts US$198-00


B200 F/O Left Panel - Backlit Panel Only US$229-00


B200 F/O Left Panel - Backlit Panel w/parts US$332-00

B200 F/O Right Panel

Dimensions: 286mm (wide) x 160mm (high)

If purchased with all of the parts, this panel will be supplied along with all of the switches as well as
the five dummy gauges.

B200 F/O Right Panel - Non-Backlit Panel Only US$42-00


B200 F/O Right Panel - Non-Backlit Panel w/parts US$184-00


B200 F/O Right Panel - Backlit Panel Only US$85-00


B200 F/O Right Panel - Backlit Panel w/parts US$227-00

King Air Simulator Construction Plans

These plans are supplied via email in PDF format and currently contain five separate multi-page
documents which detail the construction of the following items: Fuselage Structure, Fuselage Flooring,
Fuel Panel, Crew Windows, and Overhead.

All dimensions are in millimetres and the drawings are based on a Super King Air B200.
The main advantage of building with these plans, of course, is that all of our King Air panels and
accessories are based around these measurements.


King Air Simulator Construction Plans US$22-00

B200 Pressure Faceplate

Dimensions: 140mm (wide) x 96mm (high)

B200 Pressure Faceplate - Non-Backlit Panel Only US$31-00


B200 Pressure Faceplate - Non-Backlit Panel w/parts US$63-00


B200 Pressure Faceplate - Backlit Panel Only US$65-00


B200 Pressure Faceplate - Backlit Panel w/parts US$98-00

B200 Fuel System Circuit Breakers Panel

Dimensions: 250mm (wide) x 100mm (high)

If purchased with all of the parts, this panel will be supplied along with the switches, the fitted dummy
circuit breakers, and the pair missile switch covers.

B200 Fuel CB Panel - Non-Backlit Panel Only US$78-00


B200 Fuel CB Panel - Non-Backlit Panel w/parts US$158-00


B200 Fuel CB Panel - Backlit Panel Only US$179-00


B200 Fuel CB Panel - Backlit Panel w/parts US$259-00

B200 Fuel Panel

Dimensions: 250mm (wide) x 95mm (high)

If purchased with all of the parts, this panel will be supplied along with all of the switches, the
pushbuttons, the vinyl caps, and two dummy gauges. The holes for the gauges have been designed
to fit Flight Illusion's GSA-61 gauges.

B200 Fuel Panel - Non-Backlit Panel Only US$59-00


B200 Fuel Panel - Non-Backlit Panel w/parts US$150-00


B200 Fuel Panel - Backlit Panel Only US$175-00


B200 Fuel Panel - Backlit Panel w/parts US$266-00

B200 Main Annunciator Panel

Dimensions: 210mm (wide) x 69mm (high)

Our MIP Annunciator Panel can now be purchased complete with a fully-populated LED circuit board
along with a separate connector board. The connector board allows for either RJ45 connections or
standard pin headers. The RJ45 connections are ideal for easily connecting to our Conditional 64
Outputs Board. This panel is supplied with our standard legends and the appropriately coloured
LEDs, although these can be customised if necessary. As they are separate annunciator blocks
however, they can also be changed at a later stage in your build if this is required.

B200 Main Annunciator Panel US$181-00


B200 Main Annunciator Panel w/LED PCB US$415-00

B200 Glareshield Annunciator Panel

Dimensions: 194mm (wide) x 53mm (high)

Our Glareshield Annunciator Panel can now be purchased complete with a fully-populated LED
circuit board along with a separate connector board. The connector board allows for either RJ45
connections or standard pin headers. The RJ45 connections are ideal for easily connecting to our
Conditional 64 Outputs Board. This panel is supplied with our standard legends and the appropriately
coloured LEDs, although these can be customised if necessary. As they are separate annunciator
blocks however, they can also be altered and/or re-arranged as required.

B200 Glareshield Annunciator Panel US$127-00


B200 Glareshield Annunciator Panel w/LED PCB US$307-00

B200 Main Circuit Breaker Panel

Dimensions: 328mm (wide) x 294mm (high)

This panel is supplied with all of the dummy circuit breakers fitted and we also apply the vinyl labels.
We currently do not offer a backlit version of this panel, although if this is a requirement for your build,
please ask and we’ll see what we can do!

B200 Main Circuit Breaker Panel US$355-00

B200 Pedestal Gauge Faceplate

Dimensions: 208mm (wide) x 81mm (high)

If purchased with all of the parts, this panel will be supplied with three dummy gauges.

B200 Pedestal Faceplate - Non-Backlit Panel Only US$33-00


B200 Pedestal Faceplate - Non-Backlit Panel w/parts US$90-00


B200 Pedestal Faceplate - Backlit Panel Only US$65-00


B200 Pedestal Faceplate - Backlit Panel w/parts US$122-00

B200 Flight Selector Panel

Dimensions: 185mm (wide) x 54mm (high)

If purchased with all of the parts, this panel will be supplied with the six illuminated buttons.

B200 Flight Selector - Non-Backlit Panel Only US$27-00


B200 Flight Selector - Non-Backlit Panel w/parts US$102-00


B200 Flight Selector - Backlit Panel Only US$45-00


B200 Flight Selector - Backlit Panel w/parts US$120-00

B200 Audio Panel

Dimensions: 186mm (wide) x 95mm (high)

If purchased with all of the parts, this panel will be supplied with the switches, potentiometers,
sockets, LEDs, and knobs.

B200 Audio Panel - Non-Backlit Panel Only US$49-00


B200 Audio Panel - Non-Backlit Panel w/parts US$112-00


B200 Audio Panel - Backlit Panel Only US$129-00


B200 Audio Panel - Backlit Panel w/parts US$192-00

B200 EHSI Panel

B200 Operational Altitude Alert System

Dimensions: 90mm (wide) x 68mm (high) - This is the basic panel size

Included in this package is our fully-populated King Air B200 Altitude Alert Panel (with either white or
red 7-segment LED displays), processor board, buzzer, cables, and software.

During operation, once the altitude setting has been adjusted, at 1000 feet before the ‘set altitude’
the beeper will sound three times and the red light illuminates. When you get within 300 feet of the
set altitude, the red light will turn off, and once you reach the set altitude the beeper will sound three
more times. The same operation applies whether you're climbing to a set altitude or descending.

The 'Push to Cancel' button will cancel the alert system and it won't be re-activated again until
another altitude is set.

The units are connected via USB.

The panel is backlit and there is a choice of either white or red digits.

Note: A power supply (typically a computer power supply) is required but is not supplied.

B200 Operational Altitude Alert US$364-00

B200 Standard Altitude Alert Panel

Dimensions: 90mm (wide) x 68mm (high)

If purchased with all of the parts, this panel will be supplied with the illuminated button, an encoder,
and a knob. There is also an acrylic window recessed into this panel.

B200 Alt Alert Panel - Non-Backlit Panel Only US$34-00


B200 Alt Alert Panel - Non-Backlit Panel w/parts US$83-00


B200 Alt Alert Panel - Backlit Panel Only US$84-00


B200 Alt Alert Panel - Backlit Panel w/parts US$133-00

B200 Cockpit Voice Recorder Panel

Dimensions: 186mm (wide) x 54mm (high)

If purchased with all of the parts, this panel will be supplied with the two illuminated buttons, one
button cover, two square pushbuttons, a dummy gauge, a socket, and two LEDs.

B200 CVR Panel - Non-Backlit Panel Only US$31-00


B200 CVR Panel - Non-Backlit Panel w/parts US$128-00


B200 CVR Panel - Backlit Panel Only US$65-00


B200 CVR Panel - Backlit Panel w/parts US$162-00

B200 Rudder Boost Panel

Dimensions: 186mm (wide) x 118mm (high)

If purchased with all of the parts, this panel will be supplied with the switches, white vinyl caps,
encoders, and knobs.

B200 Rudder Boost Panel - Non-Backlit Panel Only US$34-00


B200 Rudder Boost Panel - Non-Backlit Panel w/parts US$110-00


B200 Rudder Boost Panel - Backlit Panel Only US$84-00


B200 Rudder Boost Panel - Backlit Panel w/parts US$160-00

B200 Lower Overhead Panel

Dimensions: 378mm (wide) x 71mm (high)

If purchased with all of the parts, this panel will be supplied with two dummy gauges and two
pushbuttons. This panel is also available in dark grey.

B200 Lower Overhead - Non-Backlit Panel Only US$47-00


B200 Lower Overhead - Non-Backlit Panel w/parts US$118-00


B200 Lower Overhead- Backlit Panel Only US$107-00


B200 Lower Overhead - Backlit Panel w/parts US$178-00

B200 Upper Overhead Panel

Dimensions: 380mm (wide) x 169mm (high)

If purchased with all of the parts, this panel will be supplied with a large ON/OFF switch, eleven rotary
switches, and knobs.

B200 Upper Overhead - Non-Backlit Panel Only US$158-00


B200 Upper Overhead - Non-Backlit Panel w/parts US$278-00


B200 Upper Overhead - Backlit Panel Only US$327-00


B200 Upper Overhead - Backlit Panel w/parts US$447-00

King Air Motorised Trim Unit

Our complete Operational Elevator Trim Unit is supplied pre-assembled and consists of the following
components:

- Trim Wheel (unpainted)
- Trim Dial (printed/laminated scale supplied)
- Gears and Belts
- Motor and Mount
- Motor Control System Circuit Board
- Pot to connect to your joystick controller
- Push-rod to connect trim dial to pot
- Physical stops to prevent over-travel

The mechanics of the unit is assembled on a shaped side-plate, and a corresponding side-plate for
the other side is also supplied. These can then be screwed to the outer sections of your throttle
console/pedestal, where they will then form the correct curve for the rest of your throttle lever assembly
All you need to do is connect 12Volts
DC to the control system as well as
connect three wires to the centre-biased
rocker switch in your yoke. The rocker
switch will then control the forward and
backward motion of the trim wheel. The
geared down trim dial is connected via a
pushrod to the pot (mounted on its own
bracket), which will be wired to your
joystick controller. (This will need to be
set up in FSUIPC as the Elevator Trim
input)
The trim wheel can be manually operated as well, as the motor torque has been purposely kept low
so to allow it to readily stall.

King Air Motorised Trim Unit US$1460-00

B200 Throttle Quadrant Kit

This kitset is supplied with all of the difficult parts needed to construct your very own throttle quadrant.
Included in this kitset are all of the levers and knobs, the flap knob, guard, and mechanism (but
not the switch), the lever mounting plates, the fore and aft stops, the sliding pin mechanisms, and
two 12mm thick end plates. All of the mounting plates and the end plates have the correct arc so that
you can fit your TQ cover panel when you make it. Our powered trim system is the same shape, and
effectively replaces the left hand end plate if you wish to retro-fit it.

The Throttle Levers have a 'lifting' action to get into the reverse area, and the Condition Levers have a
'move sidewards' action to get into the Fuel Shutoff gate, as per the real aircraft. There is no 'gate' on
the Propeller levers.

The kit can be assembled with thru-bolts and spacers (not supplied).

Because we don't know how people are going to make the TQ cover plate, we do not bend the levers,
but leave it to the individual to do it themselves using the dimensions and angles in the Pedestal
section of the construction plans as a basis. All of the necessary bolts and nuts for the levers are
included, as are the Teflon disks that go on all of the rubbing surfaces.

Also supplied are the Aileron/Rudder Trim knobs and disks (with laminated scales)

(Please note: although all of the necessary pieces are here, there is still a lot of work needed to be
done to complete the project. We are, of course, happy to guide you through the process with photos
and diagrams if needed.)

B200 Throttle Quadrant Kit US$993-00
Dimensions: 121mm (wide) x 75mm (high)

If purchased with all of the parts, this panel will be supplied with the fifteen pushbuttons.


B200 EHSI Panel - Non-Backlit Panel Only US$41-00


B200 EHSI Panel - Non-Backlit Panel w/parts US$71-00


B200 EHSI Panel - Backlit Panel Only US$95-00


B200 EHSI Panel - Backlit Panel w/parts US$125-00