If you are intending to purchase several items at once, please contact us at
info@ruscool.co.nz - we will calculate some better shipping costs for you
Knobs

23mm Bevelled Overhead Knob Set

28mm Bevelled Overhead Knob Set

These are the knobs that we use on our King Air B200 overhead panels.

23mm Bevelled Overhead Knobs - Set of 12 US$84-00
These are the knobs that we use on our King Air C90 overhead panels.

28mm Bevelled Overhead Knobs - Set of 12 US$84-00

Flange Knob

This knob is supplied painted and with a grub screw fitted as shown.

Dimensions: 12mm (high) x 19mm (skirt diameter) x 21mm (length)

Flange Knob US$5-00

Cessna Knob Set

These are the knobs that we use on our Cessna product range and are supplied painted, with grub
screws fitted, and pointer stickers fitted.

Dimensions: 1 x 19mm / 4 x 17.5mm

Cessna Knob Set (set of five as shown) US$35-00

Flange Pointer Knob

Dimensions: 25mm diameter

This knob is supplied painted and with a grub screw fitted.

Flange Pointer Knob US$5-00

Trim Knob

This knob is supplied painted, with a grub screw fitted, and with the pointer label attached.

Dimensions: 23.5mm (high) x 25mm (diameter)

Trim Knob US$7

Fine-Fluted Dual Encoder Knobs

Small Knob: 19.0mm diameter / 12.5mm high (with 1.3mm pilot hole)

Large knob: 24.0mm diameter / 12.0mm high (either 6mm or 1/4" hole for shaft)

Each knob assembly consists of a top section, a bottom section, and an engraved insert.

Each individual knob is fitted with an M3 grubscrew for fixing to the shaft.

These knobs are typically painted black with a grey dummy button on top. The dummy button can
either be engraved with your chosen text or left blank.

Fine-Fluted Dual Encoder Knob (per assembly) US$7-00

Triple-Layered Dual Encoder Knobs

Important note! Although there are three layers to these style of knobs, the top two sections are
actually joined together and so they are only suitable for use with dual encoders.

Top Knob: 14.0mm diameter / 10mm high

Central Knob: 19.0mm diameter / 10mm high (with 1.3mm pilot hole)

Large knob: 24.0mm diameter / 10mm high (either 6mm or 1/4" hole for shaft)

The combined height of these knobs when fitted together is 27.5mm.

Each individual knob is fitted with an M3 grubscrew for fixing to the shaft.

These knobs are typically painted black but can be customised upon request.

Triple-Layered Dual Encoder Knob (per assembly) US$7-50

Boeing Style Medium Knobs

Injection moulded grey plastic

18.5mm diameter at bottom / 16.0mm diameter at top / 16.8mm high (1/4" hole for shaft)

Boeing Style Medium Knobs (each) US$5-00


Boeing Style Medium Knobs (x 10) US$45-00

Various other knobs

As well as the knobs that are shown above, we also design custom knobs and have a wide range of
previously manufactured knobs that are not shown here. They can be made to fit different shaft
sizings etc.

If you have any specific requirements, please contact us and we’ll work with you to find a solution.

Below are a few examples: